A Discussion On The Process Of Insulation Removal For Your Home In Los Angeles

Know extensively about the system to remove insulation from the attic space of your home,

The insulation installed in your attic will not last forever and at some stage, it will have to be removed or to be more precise replaced. You simply cannot do away with insulation and old insulation will have to be replaced. The term insulation removal comes when there is a need to completely pull out the old insulation and replace it. Has the insulation in your attic suffered from water damage? It could also have been eaten away extensively by pests, mice & rodents. This is the stage when the old insulation has to be removed and one must go for a completely new installation. Come discuss with us and we will tell you about the insulation removal process

We are Attic Wizard and have for long been catering to the insulation needs of residents in the city of Los Angeles. The old insulation in the attic space may be bothering you and let us discuss the removal process in detail.

A basic inspection of the attic

This is one of the first things, which must be done as a part of the insulation removal process. There are plenty of things to do at the inspection stage and firstly, there is a need to identify the insulation that has to be removed. Your attic insulation could be anything from the spray foam to the batt & roll version. You could also have a blown-in-insulation and once the type of insulation is understood, it is now easy to plan the removal. During the attic inspection, one can also check out for general damages in the form of exposure to moisture or even pest infection. There could also be asbestos and this threat is a reality for older homes.

A removal plan

The attic inspection will give you an insight into the condition of the insulation and the hazards, which you may face during the removal. Once you have got a brief of the task in hand the key will be to prepare a plan. There is a need for equipment in the form of high powered vacuum with a large diameter hose. Before the work starts, the key will be to remove the hazards in the form of mold, mild dew & even asbestos. There could be health hazards during the vacuuming process and you must have adequate protection. There could be some problems if the attic space is small and there are simply too many obstructions for vacuuming. In this scenario, it is always better that you seek professional help and we are ready to assist.

The health and safety considerations to take

There is a need to take safety measures for the insulation removal process. There might be a need to wear heavy gloves, goggles & respirators. During the work, there could be a need to seal the rest of the home because there will be dirt. If you are doing it during the warmer months, there will be a need to take breaks because of heat exhaustion. The time taken for the work process could be anything in the range of 4 to 6 hours and it depends upon the size of the attic. The nature of obstructions and the volume of insulation to be removed will have a say here.

Conclusion

We have discussed a bit on the insulation removal process and it is hectic. You will need professional help and one can get a free insulation service estimate from Attic Wizard. You can contact us for the removal and we are ready to help out in this regard. We will remove the insulation and do a fresh installation to make the home energy-efficient once again.